Main

Sashco Wood Finishes from The Paint Place of Portage Wisconsin

 

Sashco Log Jam Chinking
Log Jam chinking is the elastic sealant that handles joint movement up to 100% - even in joints up to 4" wide - while maintaining its original appearance. With superior adhesion and elasticity, Log Jam chinking is guaranteed not to crack, tear or peel away from logs. Plus, it's the only chinking to hold a UL one-hour fire rating: when applied in accordance with Fire Resistance Directory Design No. UL519.
Log Jam chinking's six textured colors seal your home with the traditional look of mortar and are available in two convenient sizes (5 gallon pails and 30 oz. cartridges).
Sashco Backer Rod
Backer Rod is a foam material used to fill large checks and gaps between logs. It also provides support for chinking and sealants. Its primary purpose is act as a "bond-breaker" and promote two-point adhesion (see diagram), giving the joint and sealing material the ability to compress and expand as logs move. Sealants and chinking do not adhere to the backer rod - only to the log surfaces of the joint - allowing for movement without damaging the sealing material
 
Sashco Log Builder Log Home Sealant

All logs move. That's why Log Builder Log Home Sealant was specifically designed to absorb all log movement. Whether it's shrinking, swelling, extreme weather or settling foundation, Log Builder Log Home Sealant moves with your home, maintaining an effective seal.
Since it stretches and compresses up to 100% of the original joint size and stays rubbery, Log Builder won't crack or pull away. It creates a tight seal to keep water, dust and wind from seeping into your home.

Use one of Log Builder's seven water-based colors to seal around windows, doors and base boards. And don't forget to seal checks and cracks. Any split in the logs can promote decay and allow the elements to enter your home. Log Builder is available in 10.5 oz. and 29oz. cartridges as well as 5-gallon pails for bigger jobs. Colors available:
10.5 oz. cartridge - Dark Brown, Gray, Tan, White Pine, Woodtone
29 oz. cartridge - Tan, Woodtone
5 gallon pail - Black, Dark Brown, Gray, Redwood, Tan, White Pine, Woodtone

Sashco Brushover
Restore the look of your chinking with Brush Over chink coating. Brush Over glides on with the ease of paint, but is actually elastic - allowing it to move with the elastic chinking beneath. Whether you are re-finishing older chinking (synthetic or mortar type), touching up discoloration caused by staining or simply changing the color of your existing chinking, Brush Over

is the fast and effective way to give your home the just-chinked look.Brush Over looks like real mortar chinking - it's lightly textured and colored to match all five Log Jam chinking colors. It is non-toxic, dries fast and cleans up with just water. Brush Over is available in handy two-gallon pails.

Sashco Penetreat
When sprayed or brushed on your home, PeneTreat™, a borate-based wood preservative, forms a shell of protection to defend against rot, most wood-destroying insects and fungi. PeneTreat™ is a powder that is mixed with water and then applied with a brush or sprayed on with a garden sprayer. It is also EPA-approved. PeneTreat™ will not effect the color of wood, interfere with stain or caulk adhesion, and is completely odorless. Low cost and easy application make PeneTreat™ the popular choice.
Sashco Cobra™ Rod is a solid rod-shaped co-biocide - with boron and copper - that is installed inside the wood. Activated by moisture, it sets up a barrier against rot and insect infestation.

Cobra™ Rod controls fungal decay and wood-boring insects - i.e. both a fungicide and insecticide. It is safe to handle, safe to the environment, easy to install and longer lasting than pre-treated lumber or topical applications. EPA-USA approved.Cobra™ Rod is comprised of three recognized water-diffusible wood preservatives, Anhydrous Disodium Octaborate, CopperOxide and Boric Acid.

Sashco CPR Log Cleaner & Brightener
CPR is used to clean and brighten uncoated wood that is dirty, faded or gray from UV exposure. Mix CPR to the brightening solution strength for use on new construction just prior to staining to remove dirt and grime from the building process and to break down mill glaze. Mixed at the cleaning solution strength - use for periodic cleaning on stained logs to extend the life of your stain.
Sashco Conceal Sashco Conceal
Conceal's light texture simulates the natural roughness of wood. Conceal's 7 colors blend in with the most popular stains used on log homes, and Conceal's light texture simulates the natural roughness of wood. The combination of color and texture makes it hard to see where the caulking ends and the logs begin. Instead, they just blend together. Additionally,
Conceal. . . cleans up with soap and water, Is resistant to rainfall in 1-4 hours, has a limited lifetime warranty and has Has superior elongation, memory and adhesion.
Conceal is available in 10.5 oz. and 29 oz. cartridges as well as 5-gallon pails for bigger jobs. Colors available:

10.5 oz. cartridge - Prairie Gold, Warm Honey, Harvest Wheat, Golden Mesa, Canyon Wall, Santa Fe Trail, Red Earth
29 oz. cartridge - Harvest Wheat, Golden Mesa, Canyon Wall, Santa Fe Trail
5 gallon pail - Warm Honey, Harvest Wheat, Golden Mesa, Canyon Wall, Santa Fe Trail, Red Earth
Sashco Capture-Cascade Log Staining System Sashco Capture-Cascade Log Staining System

Capture Log Stain's unequaled formula allows the coating to move freely as your logs inevitably expand and contract (as moisture escapes and temperatures change). Which means no pealing, flaking or chalking-just a beautiful coating that really lasts! Loaded with UV absorbers, Sashco's Capture protects your home from the damaging effects of the sun's ultraviolet rays. Capture Log Stain glides on and clean up is easy with just soap and water.

Capture Log Stain is the pigmented part of a two-part system: An extremely effective, attractive stain followed by a clear, weather-repellent topcoat called Cascade. If you select any of the lighter colors of Capture Log Stain (Almond Bark, Natural, Wheat, or Bronze Pine) for best durability, we recommend two heavily applied coats, followed by one coat of Cascade. One coat of Capture Log Stain can perform very well if it is sprayed heavily and then immediately and vigorously back-brushed. Cascade provides added exterior protection against damaging UV rays. It dries with a modest sheen and adds depth to the appearance of stained logs.

Sashco Transformation Log Stain Sashco Transformation
When it's time to restore an eroded, failing stain, or if you need to maintain a coating that has lost its luster, remember one word, transformation. Better yet, remember two words: Transformation™ Stain. Transformation™ Stain will transform the appearance of your exterior logs and exterior vertical woodwork from dull and lifeless to rich and brilliant - especially for older logs needing restoration. The stain that's easy to remember because its name describes what you want and what it provides, Transformation!

Sashco Chinkers Edge Chinking

Sashco Chinkers Edge Chinking
Chinker's Edge makes your work go faster! It gives you the edge in tooling and clean up - savings as high as 20% in labor costs or application time. Professional chinkers have developed and tested the final formulation. Tooling is unbelievable easy, and, because little to no water is needed in the tooling process, clean up is practically eliminated. Chinker's Edge performance is guaranteed with a 10-year warranty, or when used with any of Sashco's stains, (Sashco's Capture/Cascade or High Sierra Log Stain, or for interior log treatment, Symphony Clear Coat) a Limited Lifetime Warranty.
Sashco High Sierra Log Stain Sashco High Sierra Log Stain
High Sierra Log Stain was formulated for ease of application without sacrificing beauty or performance. It really is easy to apply. The 2-coat system has a longer working time so that lap marks are practically eliminated and the second coat evens out inconsistencies that may have occurred on the application of the first coat. It can even be applied at cooler temperatures, surface temperatures as low as 40 F. High Sierra has a color pallet of 10 choices, from rich, warm browns, to natural, honey colors.

 

We can ship - give us a call! 608-566-1046.